Selection criterion
Cargo restraint
Standard floor-level lashing rings provide restraint points for securing general cargo during transport; use certified equipment and remain within the marked lashing capacity.
SKU · 10HC-15GB-S01
10ft High Cube Container
Description
This 10 ft high-cube general-purpose container measures 2,991 mm long, 2,438 mm wide, and 2,896 mm high externally, with an internal height of 2,698 mm that adds usable volume over a standard-height unit. The shell is built from corrugated Corten steel in walls and roof, with a bamboo-composite floor rated for normal forklift and pallet-truck traffic. A single front cargo door set, 2,342 mm wide by 2,585 mm high, provides loading access. Forklift pockets are fitted for ground handling, and four vents support airflow. The container weighs 1,350 kg empty and carries a 10,000 kg payload for an 11,350 kg maximum gross weight.
At a glance
Specification overview
Review the published dimensions, capacity, door configuration and construction details for 10ft High Cube Container (10HC-15GB-S01). Every value shown belongs to this exact build.
What distinguishes this specification
This is the family's standard all-rounder: a 10 ft high-cube general-purpose container with no specialist configuration code, combining compact footprint with extra internal height for volume-sensitive storage. The bamboo-composite floor and Corten-steel shell suit typical site storage, self-storage, equipment housing, and urban last-mile logistics where standard cargo handling applies. Specialist LR or SF configurations are available for buyers needing lashing rails or steel flooring.
- External size
- 2,991 × 2,438 × 2,896 mm
- Internal volume
- 18.01 m³
- Payload
- 10,000 kg
- Tare
- 1,350 kg
- Door opening
- 2,342 × 2,585 mm
- CSC design
- yes
Dimensions reference
Exact measurements
These values belong to this specification record. Family pages can show nominal size; this page shows the actual specification measurements.
Exterior views
Front elevation
Side elevation
Measurement set
External dimensions
Published values for this technical specification.
MetricImperial
Length2,991 mm9' 9.8"
Width2,438 mm8' 0"
Height2,896 mm9' 6"
Interior access
Door opening
Interior side
Measurement set
Internal dimensions
Published values for this technical specification.
MetricImperial
Length2,840 mm9' 3.8"
Width2,350 mm7' 8.5"
Height2,698 mm8' 10.2"
Measurement set
Door opening
Front cargo doors · front
MetricImperial
Width2,342 mm7' 8.2"
Height2,585 mm8' 5.8"
Sill height0 mm0' 0"
Measurement set
Capacity & weights
Published values for this technical specification.
MetricImperial
Internal volume18.01 m³636 ft³
Max gross11,350 kg25,022 lbs
Payload10,000 kg22,046 lbs
Tare1,350 kg2,976 lbs
Applications
Applications for 10ft High Cube Container
The strongest use cases for this specification, based on its configuration and published selection criteria.
Suitable application
Self-storage
Containers used as rentable units in self-storage operations.
Selection criterion
Frequent relocation
ISO freight construction, corner castings, and the Corten-steel shell are designed for repeated lifting, transport, and redeployment. On white variants, the PU coating adds paint durability that helps the container remain presentable.
Application
Site storage
Secure temporary or permanent storage at an operating site.
Application
Equipment storage
Storage for tools, machinery, and operational equipment.
Selection criterion
Forklift traffic
The bamboo-composite floor supports normal pallet-truck and forklift loading within the published axle and floor limits; choose a steel-floor specification for intensive repeated traffic.
Selection criterion
Heavy rolling loads
Wheeled machinery may be loaded only after confirming wheel loads, axle loads, and load distribution against the published floor limits; a steel floor is preferred for repeated heavy rolling traffic.
Application
High-volume storage
Storage where additional internal height and cubic capacity are important.
Selection criterion
Heavy point loads
Concentrated machinery loads require confirmation against the published floor rating and may need load-spreading plates; a steel-floor specification is the stronger starting point for repeated point loading.
Application
Last-mile logistics
Compact freight and storage deployments for urban and space-constrained locations.
Selection criterion
Moisture-resistant flooring
The bamboo-composite floor is intended for normal dry cargo use but remains an absorbent floor system; avoid prolonged damp exposure and choose steel for frequently wet operating conditions.
Application
Parts and spares storage
Organised, secure storage for replacement parts and maintenance inventory.
Selection criterion
Easy spill cleanup
Minor spills should be removed immediately, but the bamboo-composite floor and its joints can retain moisture or contaminants; choose steel where frequent cleanup is expected.
Selection criterion
High wear resistance
The bamboo-composite floor is durable for normal cargo handling; choose a steel-floor specification for abrasive loads or intensive repeated operations.
Construction
Build details
The family baseline describes the shared container design; specification values identify this exact configuration.
Family baseline
10ft High Cube Container
Compact extra-height containers with additional height for taller goods, offering higher volume at a small footprint.
10HC · High Cube · 2,991 × 2,438 × 2,896 mm · iso nominal
View the 10ft High Cube Container familyExact specification
10ft High Cube Container
- Specification code
- 10HC-15GB-S01
- ISO size/type
- 15GB
- Commercial condition
- one trip
- Introduced
- 2026
Published construction attributes
Construction group
Access
- Location
- front
- Opening
- 2,342 × 2,585 mm
- Lockbox
- Not specified
Construction group
Construction
- Floor material
- Bamboo composite
- Wall material
- Corrugated Corten steel
- Roof material
- Corrugated Corten steel
- Gooseneck tunnel
- No
- Vent count
- 4 vents
Standards and approval
Applicable standards and CSC approval
Published design claims, assessment status, and approval references for this specification.
Standard
ISO 668
Series 1 freight containers — Classification, dimensions and ratings
- Applicability
- applicable
- Assessment
- CSC-supported
Applicable to the stated Series 1 dimensions and rating system. Inferred from the dry-van ISO size/type code; compliance has not been assessed.
Standard
ISO 1161
Series 1 freight containers — Corner and intermediate fittings — Specifications
- Applicability
- applicable
- Assessment
- CSC-supported
Applicable to Series 1 corner and intermediate fittings. Confirm manufacturer drawings or test documentation before assigning a stronger status.
Standard
ISO 1496-1
Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes
- Applicability
- applicable
- Assessment
- CSC-supported
Applicable part for a general-purpose dry freight container. Confirm design or type-test documentation before assigning a stronger status.
Standard
ISO 6346
Freight containers — Coding, identification and marking
- Applicability
- applicable
- Assessment
- not assessed
Applicable to container identification, size/type coding, and permanent markings. Coding applicability does not establish structural compliance.
Standard
ISO 3874
Series 1 freight containers — Handling and securing
- Applicability
- applicable
- Assessment
- not assessed
Applicable to handling and securing of Series 1 containers. Confirm loaded lifting methods and restrictions before assigning a stronger status.
Convention approval
CSC design approval
- Design approved
- yes
- Approval basis
- type approval
- Plate supplied
- yes
- Examination scheme
- assigned per unit
Technical questions
Frequently checked details
Direct answers based on the published values in this specification record.
The published external dimensions are 2,991 × 2,438 × 2,896 mm.
The published payload is 10,000 kg, with a tare weight of 1,350 kg and a maximum gross weight of 11,350 kg.
The published internal capacity is 18.01 m³. Internal dimensions are 2,840 × 2,350 × 2,698 mm.
The published cargo door opening is 2,342 × 2,585 mm.
The specification records CSC design approval as yes, based on type approval, with plate supply recorded as yes.
Published finishes include RAL 7016 Anthracite grey, RAL 9010 Pure white · Polyurethane coated. Small quantities can be repainted in a requested color, while larger production batches can be ordered in specific colors with project or company branding, subject to order requirements and confirmation.
Photo library
Production photography
Browse 5 reference photos by finish. Only the selected finish is loaded, keeping the technical page fast and focused.